Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Fort Lauderdale?
Spring replacement in Fort Lauderdale typically runs $180 to $340 for a torsion spring job on a standard single-car door, and closer to $260 to $340 for a double door with two springs. Most jobs are finished in a single visit, and the price includes the new spring, the labor, and a balance and safety check. If your door has snapped a spring and won’t lift, that range is what you should expect to see on the invoice. We give free estimates, so you can call (855) 382-3858 and get a firm number before anyone touches the door.
We’re Fort Lauderdale Garage Door Repair, and springs are one of the most common calls we get across this city. Between the salt air, the year-round humidity, and the sheer number of homes with aging garage doors, spring failure here is less a question of if and more a question of when. This guide breaks down real 2026 pricing for the Fort Lauderdale market so you know what a fair quote looks like before you commit.
Key Takeaways
- Most Fort Lauderdale spring replacements land between $180 and $340.
- Double doors with two springs sit at the top of that range; a single spring on a lighter door sits at the bottom.
- Torsion springs fail faster near the coast because of salt air and humidity, which can shorten service life.
- Replacing both springs at once is usually cheaper than two separate visits.
- We work on the brands already on your door: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers break down for a typical Fort Lauderdale job. These ranges are typical prices.
| Line Item | Typical Cost Range |
|---|---|
| Single torsion spring replacement (one spring) | $180 – $260 |
| Double torsion spring replacement (two springs) | $260 – $340 |
| Extension spring replacement (per pair) | $180 – $280 |
| Spring replacement plus cable repair | $260 – $480 |
| Spring replacement plus roller replacement | $240 – $400 |
| Spring replacement plus opener diagnostic | $220 – $380 |
Those are the real buckets. A straightforward single-spring swap is the low end. When a spring takes a cable or a set of rollers with it, which happens more than people expect, you’re stacking a couple of line items and the total climbs toward the middle or high end. Our Spring Replacement in Fort Lauderdale page covers the full process if you want to understand the work step by step. For a plain garage door repair call that isn’t a spring, expect the broader repair range of $150 to $600.
What pushes a spring job up? Heavier doors, high-lift or unusual track setups, doors that haven’t been serviced in years, and any rusted or seized hardware that has to be cut out and replaced. What keeps it down? Catching a worn spring before it breaks, choosing to replace both springs together, and having clear access to the door so nothing has to be moved out of the way first.
What Affects Spring Replacement Pricing in Fort Lauderdale
Pricing here isn’t the same as pricing in a dry, inland market. A few local factors move the number:
- Coastal corrosion. Homes east of Federal Highway, from Victoria Park through Rio Vista and down toward Harbor Beach, sit in salt air that eats at steel springs. Corroded springs need more careful handling and more frequent replacement, and rusted end plates or cable drums can add labor.
- Door weight and spring count. A single-car door with one spring is the cheapest job. A double-car door or a heavy custom wood door with two or more springs sits at the top of the range. We size the spring to the door, so the quote reflects what your door actually needs.
- Humidity and heat. South Florida’s humidity and summer heat cause metal fatigue and lubrication breakdown. Springs that would last a decade up north might need attention sooner here. That’s a real cost-of-ownership factor for Fort Lauderdale homeowners, not a sales pitch.
- Age of the door and opener. An older door paired with an older opener sometimes means a spring job turns into a tune-up on the opener too. If your opener is a Chamberlain or Genie unit that’s been struggling, we’ll tell you whether it needs attention alongside the spring.
- Access and driveways. Tight driveways, low carports, and doors hemmed in by landscaping add setup time. It’s a small factor, but it’s part of why two jobs that look identical can price a little differently.
- Cable and hardware condition. Springs and cables age together. If the cables are frayed or the drums are worn, replacing the spring alone leaves you exposed to a second failure. Cable work runs $130 to $250 on its own, and bundling it usually saves you a service call.
A Safety Note Before You Touch Anything
Torsion springs store an enormous amount of energy. They’re under tension even when the door is down, and a spring that lets go while someone is working on it can cause serious injury. We don’t recommend do-it-yourself spring work, and we won’t pretend it’s a weekend project. This is one of the few home repairs where the honest advice is: leave it to someone who does it every day. The right approach is to keep the door closed, unhook the opener if you can do so safely, and call a trained technician. We handle springs with proper winding bars and the door secured, and we check the balance and the safety sensors before we leave.
Repair or Replace: What Makes Sense for Your Door?
A spring replacement at $180 to $340 is almost always the right call when the door itself is sound. The spring is a wear item. It’s designed to be replaced. But if your door is old, rusted through, or the panels are failing, putting money into springs on a door that’s near the end of its life doesn’t add up.
Here’s the rough math we share with homeowners. If a spring job is the only issue, replace the spring. If you’re looking at spring replacement plus panel work ($250 to $500 per panel) plus track or roller issues, and the door is already showing its age, a new door may be the better spend over the next few years. A full new door installation in Fort Lauderdale runs $700 to $2,200 depending on size and material. We’ll give you both numbers and tell you which one actually makes sense for your situation rather than pushing the bigger ticket.
How to Save on Spring Replacement
There’s no secret discount code for spring work, but a few habits keep the cost down:
- Fix it early. A worn spring that’s still working can be replaced on a scheduled visit. A snapped spring that’s left the door stuck usually can’t wait, and emergencies tend to cost more because everything is urgent.
- Replace both springs at once. If your door has two springs and one breaks, the other is almost certainly close behind. Doing both in one visit costs less than two separate calls and saves you a second disruption.
- Bundle related hardware. If the cables or rollers are also worn, handle them in the same visit. You’re already paying for the trip and the setup.
- Ask for a free estimate. We’ll quote before we start, so you’re never surprised by the total. Call (855) 382-3858 and we’ll give you a range over the phone and a firm price on site.
- Keep the door lubed. A little lubrication on the springs, rollers, and hinges a couple of times a year slows corrosion and wear. It’s the cheapest maintenance you can do in this climate.
We work on your brand, whatever’s on your door. That matters for pricing because we’re not learning your system on your dime. If you’ve got a LiftMaster opener and a Clopay door, we know how those components behave together. Same for Genie, Chamberlain, Amarr, Wayne Dalton, Craftsman, and Raynor. Brand-matched expertise means the recommendation is specific to your hardware, not a generic guess.
How Long Does Spring Replacement Take?
A standard spring replacement takes about an hour to an hour and a half on site. Double doors with two springs or jobs that include cable work can run closer to two hours. We don’t rush the balance check or the safety test at the end, because a door that lifts smoothly but isn’t balanced will wear out its opener and its springs faster. If we find something else while we’re in there, we’ll show you before we touch it. Repair or replace, we’ll tell you which one actually makes sense.
Why Fort Lauderdale Homeowners Call Us for Springs
We’re a garage door specialist, not a handyman or a general contractor. Every bit of our expertise is concentrated on garage doors and openers. That means when you call about a broken spring, you’re talking to someone who does this daily, not someone squeezing it in between plumbing jobs.
We cover three things and do them well: garage door repair, opener repair, and new door installation. Opener repair is a dedicated specialty for us, not an afterthought, so if your spring job turns up a struggling motor or a misaligned safety sensor, we handle it in the same visit. One call covers it. You won’t be juggling three contractors in the middle of a week when your car is trapped in the garage.
And because we also install doors, we’re not stuck trying to save a door that’s beyond saving. We can repair it, or we can replace it, and we’ll be straight with you about which makes more sense. That flexibility is why homeowners in Fort Lauderdale keep our number.
FAQs – Spring Replacement Cost
How much does garage door spring replacement cost in Fort Lauderdale?
Spring replacement in Fort Lauderdale costs $180 to $340 for most residential doors, with double doors at the higher end and single springs at the lower end. The price includes the new spring, labor, and a balance and safety check. Call (855) 382-3858 for a free estimate on your specific door.
Is it cheaper to repair or replace a garage door spring?
Repairing the spring is almost always cheaper than replacing the door, at $180 to $340 versus $700 to $2,200 for a new door. The exception is a door that’s structurally failing, where new springs would be money poured into a door that’s near the end. We’ll give you both numbers and an honest recommendation.
How often do garage door springs need replacing in Fort Lauderdale?
Expect a spring to last somewhere in the range of 7 to 12 years depending on use and conditions. Near the coast, salt air and humidity can shorten that. Doors that cycle many times a day, like a household where the garage is the main entry, wear out faster. Lubrication helps, and so does catching wear before a break.
Can I replace my garage door spring myself?
We don’t recommend it. Torsion springs are under extreme tension and can cause serious injury if handled without the right tools and training. This is a job for a trained technician with proper winding bars. Keep the door closed, don’t try to force it, and call a professional. We handle springs safely every day.
Do you charge extra for same-day spring replacement?
Our spring replacement pricing stays in the $180 to $340 range regardless of scheduling where we can accommodate it. We’ll confirm timing when you call. For an exact quote on your door, reach out at (855) 382-3858 and we’ll talk through what your door needs.
If your spring has already gone, don’t wait on it. A door stuck open or propped up is a security gap and a safety hazard, especially with kids or pets around. Head back to our home page to see everything we cover, or call us and we’ll get a technician out to take a look. Estimates are free, and we’ll give you a straight price before any work starts.
Pricing reflects the Fort Lauderdale market as of 2026. Fort Lauderdale Garage Door Repair offers free estimates – call (855) 382-3858.
What Our Customers Say
"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Yolanda Jackson"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Darnell Robinson"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Devon Dawson