Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateFast, Reliable Garage Door Opener Repair Across Kendall
If your garage door opener in Kendall has stopped responding, is grinding, or only works intermittently, the repair typically costs between $120 and $320. Most opener repairs in Kendall can be completed the same day, and we stock parts for the brands most common in this area. Call (855) 382-3858 and we’ll diagnose the issue before any work begins.
Kendall’s housing stock runs heavy with homes built between the 1970s and 1990s, and a lot of them still run their original opener. We know those units well. We also know what happens when a 35-year-old motor fights a door that’s out of balance. You get a garage that won’t open, a car trapped inside, and a morning that starts badly. That’s what we fix.
Our Garage Door Opener Repair team handles everything from fried circuit boards to stripped gears. If you’re in the 33156 ZIP code or anywhere in Kendall, we’ll get a technician to your home fast. Fort Lauderdale Garage Door Repair is built around garage doors, nothing else.
Why Fort Lauderdale Garage Door Repair Is Kendall’s Preferred Garage Door Opener Repair Company
Kendall homeowners call us because we work on their brand. LiftMaster, Chamberlain, Genie, Clopay. If it’s on your ceiling, one of our techs has opened it up before. That matters when the problem is a proprietary logic board rather than a generic gear kit.
We diagnose opener problems at the source. A door that won’t lift isn’t always a dead motor. Sometimes it’s a broken spring, and the opener is straining against a weight it was never meant to carry alone. Our techs check the whole system, not just the box on the ceiling. That’s the difference between a repair that lasts and one that fails in six months.
We also carry parts for legacy systems. Kendall has thousands of homes with original Craftsman and Genie openers from the 80s and 90s. Many companies won’t touch those units. We will, because we know when they’re worth saving and when the money is better spent on a new opener.
Eddie Callahan, who runs our service team, has spent years working on the specific mix of equipment found across Kendall and South Miami-Dade. He trains our techs to check door balance first, opener second. That sequence saves Kendall homeowners money every week.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Garage Opener Maintenance in Kendall
Garage Opener Maintenance in Kendall is about getting ahead of the salt-laden humidity that eats at metal parts year-round. We inspect the opener rail, tighten mounting hardware, check gear wear, test the auto-reverse function, and adjust force settings. A maintenance visit in Kendall runs $120 to $180, and most homeowners schedule one every 12 to 18 months. If we find worn parts during the visit, we quote the replacement before doing any work.
Rail and Drive Inspection
The opener rail in a Kendall garage collects a fine grit of salt and dust. It builds up on the chain or belt and accelerates wear on the sprocket. We clean and lubricate the rail, check chain tension, and replace any worn gear assembly while it’s still a small job.
Safety Sensor Alignment
Photo-eye sensors in older Kendall homes drift out of alignment as door frames settle or people bump them with bikes and trash bins. A misaligned sensor makes the door refuse to close, or reverse for no apparent reason. Maintenance includes realigning and cleaning both sensors and verifying the auto-reverse force setting.
Garage Door Opener Not Working in Kendall
A garage door opener not working in Kendall usually traces back to one of three things: a burned-out capacitor or circuit board, a stripped drive gear, or a door that’s gone out of balance and tripped a safety override. Repairs typically range from $120 to $320. We test the motor, the gear, the sensors, and the door’s spring tension before recommending anything.
Dead or Intermittent Motor
If the opener hums but doesn’t move, the gear is likely stripped. If it’s completely silent, the logic board or transformer may be dead. We carry replacement boards and gear kits for most LiftMaster, Chamberlain, and Genie models on the truck, so we usually fix it in one trip.
Door Reverses or Won’t Close
When a door in Kendall stops halfway or reverses right before hitting the ground, the photo-eye sensors are usually the culprit. Rust and debris on the sensor lenses is common in this climate. We clean, realign, and recalibrate the sensors, then test the full open-close cycle several times.
Trusted Brands We Service in Kendall
We’re certified to work on eight major garage door and opener brands, and the ones we see most often in Kendall are LiftMaster, Chamberlain, Genie, and Clopay. Because we carry parts for these brands on our trucks, we can often complete a repair during the first visit. If your Kendall home has an older Craftsman or a builder-grade Genie from the 1990s, we can usually source parts within a day. One call covers it.
Common Garage Door Opener Repair Problems We See in Kendall Homes
- Opener straining against worn torsion springs. Kendall’s 1970s and 1980s homes often still have original springs that no longer carry the door’s weight. The opener grinds and overheats trying to compensate, which kills motors quickly.
- Corroded rails and track misalignment. Salt-laden humid air works on the metal year-round. We see opener rails with pitted surfaces and mounting brackets loosened by corrosion, causing jerky, noisy operation.
- Photo-eye sensors rusted or knocked out of line. In older Kendall homes, door frames settle and the sensors drift. Add rust from humidity, and the door refuses to close or reverses constantly.
- Legacy openers with obsolete parts failing under load. Pre-2000 Craftsman and Genie units are common here. When the circuit board dies, repair often doesn’t make financial sense, and we walk you through the numbers honestly.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Opener Repair in Kendall, FL
We quote every job before we start, and the price we quote is the price you pay. No adjustments after the fact. Here’s what opener-related work in Kendall typically runs:
| Service | Typical Price Range in Kendall |
|---|---|
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Spring Repair | $180 – $340 |
Opener repair cost depends mostly on what failed. A stripped gear is on the lower end. A fried logic board on a newer smart opener is on the higher end. Spring repair gets its own line because a broken spring is frequently the hidden cause of what looks like an opener failure. Call (855) 382-3858 and we’ll give you a firm quote over the phone after a few questions, or schedule a visit for a free estimate.
We Also Serve Cities Near Kendall
Our service area covers all of Kendall and the surrounding communities. We regularly work in Pinecrest, Glenvar Heights, South Miami, and Cutler. If you’re nearby and your opener is acting up, call us and we’ll route the next available technician your way.
Serving Kendall, FL - Our Local Coverage Area
We serve Kendall and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Garage Door Opener Repair in Kendall
We repair legacy openers when parts are available and the unit still has service life left, but a 1985 opener is 40 years old at this point. The decision comes down to what failed. A stripped gear is worth fixing. A dead circuit board on a unit that old usually isn’t, because the board often costs more than a new opener. We’ll show you both numbers and let you decide. Call (855) 382-3858 for an honest assessment.
First, unplug the opener for 30 seconds and plug it back in. Check that the GFCI outlet it’s plugged into hasn’t tripped. Then look for a blown fuse or a tripped breaker in the panel. If the wall button works but the remotes don’t, the outage likely wiped the memory. That’s a quick reprogramming job, typically around $120. If nothing works at all, call us.
If the motor runs but the door barely moves, the spring is probably broken and the opener is doing all the work. Pull the emergency release and try lifting the door by hand. If it’s extremely heavy or won’t stay up, the spring has failed. Spring repair in Kendall runs $180 to $340, and it’s much cheaper than replacing an opener that was never the real problem.
Opener repair alone doesn’t require a permit. But if we find that your door needs replacement, Miami-Dade’s High-Velocity Hurricane Zone rules come into play. Many Kendall homes built before 1994 have doors that were never wind-load approved. When that door gets replaced, it must meet current product approval standards. We’ll flag that before any work starts so there are no surprises at permitting.
Lubricate the rail and hinges every six months, keep the photo-eye sensors clean, and have the spring tension checked once a year. The salt and humidity in Kendall corrode metal faster than inland Florida, so regular lubrication is the single best thing you can do. A maintenance visit runs $120 to $180, and it catches small problems before they turn into motor failure.
Written by Eddie Callahan, Owner at Fort Lauderdale Garage Door Repair, serving Kendall since the company’s founding.
Contact Us for Garage Door Opener Repair in Kendall
If your opener is dead, noisy, or just not lifting like it used to, call us at (855) 382-3858. We’ll diagnose the problem, quote the repair before any work begins, and get your door working again. Free estimates on all opener repair work in Kendall.